{"product_id":"happymodel-mobula7-1s-75mm-analog-fpv-brushless-whoop-drone-choose-receiver","title":"Happymodel Mobula7 1s 75mm Analog FPV Brushless Whoop Drone - Choose Receiver","description":"\u003cp\u003eWe’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season.\u003c\/p\u003e\n\u003cp\u003eThe world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.\u003c\/p\u003e\n\u003cp\u003eThe new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.\u003c\/p\u003e\n\u003cp\u003eNew onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCheck out our \u003c\/span\u003e\u003ca title=\"Micro BNF RTF PNP FPV Drones Sold At Pyrodrone\" href=\"https:\/\/pyrodrone.com\/collections\/micro-bnf-rtf-pnp\"\u003eMicro Whoop Drones\u003c\/a\u003e\u003cspan\u003e and our entire \u003c\/span\u003e\u003ca title=\"Happymodel Products Sold At Pyrodrone\" href=\"https:\/\/pyrodrone.com\/collections\/happymodel-products\"\u003eHappymodel Collection\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"fluid-width-video-wrapper\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/gJUEtYwNCEo\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eX12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eVTX Power up to 400mw\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eELRS V2.0 Support\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNEW RS0802 KV20000 motors\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRuncam Nano3 The lightest 1\/3 CMOS 800TVL Camera\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSmooth and powerful\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eCompatible for 1S Lipo\/LIHV\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommend 1S 450mah\/550mah\/650mah battery(Not include)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: RS0802 KV20000\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfiguration:9N12P\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStator Diamter:8mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStator Length:2mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShaft Diameter:Φ1.5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor Dimension(Dia.*Len):Φ10.5mm*13.5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight(g):2.0g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo.of Cells(Lipo):1S only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePropellers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 0.24g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: PC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePitch: 1 inch\u003c\/li\u003e\n\u003cli\u003eProps Dia: 40mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter Thickness: 5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter Hole Dia: 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlight controller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eX12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMCU: STM32F411CEU6 (100MHZ, 512K FLASH)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSensor: ICM42688P\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMount hole size: 25.5mm*25.5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply: 1S battery input (DC 2.9V-4.35V)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in 12A(each) Blheli_S 4in1 ESC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in Betaflight OSD(SPI Control)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5.8G OpenVTX 0mw~400mw\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in ExpressLRS 2.4G,Frsky D8\/D16\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in voltage detection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in current sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eOnboard 4in1 ESC:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 1S LiPo\/LiPo HV\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent: 12A continuous peak 15A (3 seconds)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport BLHeliSuite programmable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFactory firmware: Z_H_30_REV16_7.HEX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDefault protocol: DSHOT300\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupport Bluejay firmware\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhen use Blujay firmware with 48khz, should set startup power to 1100\/1200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOnboard SPI ExpressLRS 2.4GHz Receiver:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePacket Rate option: 50Hz\/150Hz\/250Hz\/500Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpressLRS Firmware version: V2.0\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRF Frequency: 2.4GHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAntenna : SMD antenna\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTelemetry output Power: \u0026lt;12dBm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiver protocol: SPI ExpressLRS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with ExpressLRS V2.0 TX Module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCouldn’t flash separately ExpressLRS firmware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOnboard Frsky SPI D8\/D16 receiver Version:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSPI BUS receiver Frsky D8 compatible\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible Non EU transmitter D8 modelChannels: 8ch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOnboard 5.8g VTX:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFirmware version: OPENVTX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmartaudio v2.1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePIT Mode support\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRCE Mode support\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChannels:48ch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTransmitting Power: 0\/RCE\/25mw\/100mw\/400mw\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply: DC 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent (5v): \u0026lt;650ma (400mw)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRuncam Nano3:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: RunCam Nano 3\u003c\/li\u003e\n\u003cli\u003eImage Sensor: 1\/3″ CMOS\u003c\/li\u003e\n\u003cli\u003eHorizontal Resolution: 800TVL\u003c\/li\u003e\n\u003cli\u003eLens : 2.1mm(M8) FOV 160°\u003c\/li\u003e\n\u003cli\u003eSignal System: PAL\/NTSC Non Switchable\u003c\/li\u003e\n\u003cli\u003eS\/N Ratio: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eElectronic Shutter Speed: Auto\u003c\/li\u003e\n\u003cli\u003eAuto Gain Control (AGC): Auto\u003c\/li\u003e\n\u003cli\u003eMin. Illumination: 0.01Lux@1.2F\u003c\/li\u003e\n\u003cli\u003eD-WDR: Auto\u003c\/li\u003e\n\u003cli\u003eDay\/Night: Color\u003c\/li\u003e\n\u003cli\u003ePower:DC 3-5.5V\u003c\/li\u003e\n\u003cli\u003eCurrent: 110mA@5V 120mA@3.3V\u003c\/li\u003e\n\u003cli\u003eHousing Material: ABS\u003c\/li\u003e\n\u003cli\u003eNet Weight: 1.2g\u003c\/li\u003e\n\u003cli\u003eDimensions: L14mm*W14mm*H9mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003e\u003cspan\u003ePackage Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Happymodel Mobula7 1s 75mm Analog FPV Brushless Whoop Drone - Chosen Receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Gemfan 1610-2 bi-blade propellers(4cw+4ccw)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x 1S Lipo\/LIHV USB Charger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Propeller disassemble tool\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e1 x \u003cspan data-mce-fragment=\"1\"\u003eExtra camera canopy\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/Packing-list.jpg?v=1663271737\"\u003e\u003c\/p\u003e","brand":"HappyModel","offers":[{"title":"ExpressLRS 2.4GHz","offer_id":68049546313978,"sku":"P12-11339-ELRS","price":101.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/6632\/1146\/files\/1-1_de398397-2c48-4a08-902d-72273ee8b532.jpg?v=1793615030","url":"https:\/\/aeroforgerc.store\/products\/happymodel-mobula7-1s-75mm-analog-fpv-brushless-whoop-drone-choose-receiver","provider":"AeroForge RC","version":"1.0","type":"link"}